Pad mounting hardware for Hirsch Performance big brakes, Saab 9-3OG and 9-5
OEM Brembo brake pad mounting kit for Saab 9-3OG and 9-5 equipped with 332mm Hirsch Performance big brakes. Kit consists of guide pins and clips and the anti-rattle spring.
One brake pad mounting kit required per caliper, so two needed per car
When the OG9-3 and 9-5 first came out, Hirsch introduced numerous high quality performance enhancements. Their Brembo brake setup is one such example. Using Ferrari based four-piston calipers paired with a 332mm disc. Sadly, OEM replacement parts for this setup are either not available anymore or very hard to come by. After a bit of research, I’ve been able to piece together all the parts that need replacement from time to time, including this pad hardware mounting kit!
|Dimensions||15 × 8 × 2 cm|
You may also like…
Add to cart
Até TYP 200 high performance DOT 4 brake fluid, in 1L packaging. 1L is enough for a service fill, when flushing the system 2L is recommended.
This Até fluid has a boiling point of 280 °C and a wet (or contaminated) boiling point of 198 °C. This helps reduce brake fade in high demand situations. The high wet boiling point means sudden brake fade due to contaminated fluid is reduced as much as possible. Recommended brake fluid refresh interval is 2 years (for regular street driving), on cars that are driven hard it’s recommended to flush the system more frequently.