ReierParts Fan Jet Washer Nozzle Kit for Saab 900 Classic, 9000, 900NG and 9-3OG
ReierParts fan jet washer nozzle kit, for Saab c900, 9000, 900NG and 9-3OG. These plug and play washer nozzles are a great upgrade if you use your Saab on a daily basis. Instead of two streams coming from each nozzle, these give a nice fan jet pattern. Much more efficient and effective in covering the windshield with washer fluid, very common to see in modern day cars.
Please see additional information in the product description to ensure optimal functionality.
Also fits Saab 99 and 90, but as of yet untested (and only one spot available on the hood). Ordering these for your 99/90? I’d be very happy with your feedback!
Out of stock
Get notified when this item is back in stock!
- It’s very important the checkvalves in the rubber lines of the washer system all function properly. Usually there is one near the pump and one directly underneath each nozzle. If these fail or get removed from the system the fan jet will spray rather low on the windshield. The easiest way to tell if these work alright is to check how the OEM washer nozzles function. If the spray hits the right spot on the windshield as soon as you activate the washer, usually the checkvalves are fine. If the spray moves up on the windshield when you activate the washer for a longer time (most visible when you’re stopped) one or more of the checkvalves are faulty and should be replaced.
- These nozzles sit quite tight to the hood of the car, so when installing them, make sure you hear the clips on the front and rear of the nozzle ‘click’ into place.
- These nozzles spray on the lower 1/3d of the window on 900 Classics and slightly higher on 9000’s, 900NG’s and 9-3OG’s.
|Dimensions||5 × 5 × 5 cm|
|Referentie nr (public)||